We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001457
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M12x1,25 |
Standardization | ISO 21287 |
Stroke | 10 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R422001457, reach FAMAGA, the world's top supplier of streamlined equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of goods and personalseparate attention to each purchaser. We value everyone, who cooperated with us - so, our regular clients bring in the most favorable purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 4 thousand such buyers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, Pakistan, United States, Chile, Equatorial Guinea, Burkina Faso, Malawi, Jamaica, Uzbekistan, Honduras, Colombia, Czech Republic, Oman, Eritrea, Brunei, Liechtenstein, Suriname, El Salvador, Azerbaijan, Latvia, Cyprus, Russia, Malta, Seychelles, Libya, Malaysia, Nepal, Dominica, Albania, Lithuania, Mauritius, Uruguay, United Arab Emirates, South Sudan, Vietnam, New Zealand, Morocco, Eswatini, East Timor, Iraq, Serbia, The Gambia, Angola, Kiribati, Yemen, Niger. A well-developed logistics connection and a partnership network assist us to send our goods anywhere in the globe as soon as possible without discrediting product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the range of factory-made equipment.
All products from FAMAGA are ensured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this number is amounting every day. We are pleased that customers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To get some advice or place an order, phone us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with external thread extension, dimension "A" is increased by the value of the thread extension. With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Scraper | Polyurethane |