We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480680392
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480680392, connect FAMAGA, the world's primary retailer of machine made equipment. Our company has worked for more than ten years - these are ages of experience, which are described in the quality of merchandises and individual attention to each user. We admire everyone, who liased with us - thus, our regular consumers procure the most desirable purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 4500 such clients, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Bahamas, Bolivia, Azerbaijan, Montenegro, Belgium, Honduras, Turkey, Antigua and Barbuda, Equatorial Guinea, El Salvador, Belize, Uganda, Tunisia, Malaysia, Lebanon, Ukraine, India, Bhutan, Philippines, Namibia, Niger, Malta, Laos, Israel, Brazil, Gambia, Guyana, Chile, Mozambique, Andorra, Kenya, New Zealand, Central African Republic, Djibouti, Austria, United States, Estonia, Nigeria, Ghana, Mali, Guatemala, Bangladesh, Poland, Rwanda, Uruguay, Zambia, Cyprus. A advanced logistics series and a partnership network cheer us to conduct our items anywhere in the world on-time without compromising product quality.
A specific source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this amount is increasing every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To consult or order, contact us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |