We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412008586
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 250 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412008586, get in touch with FAMAGA, the world's major producer of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of goods and particular attention to each purchaser. We understand everyone, who worked with us - therefore, our regular consumers bring in the most favorable purchase conditions and discounts on the industrial equipment market. Today, there are more than 4000 such customers, and we constantly arrange new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Canada, Eritrea, Laos, Bangladesh, Seychelles, Mali, Madagascar, Austria, Mexico, Macedonia, Indonesia, Thailand, Pakistan, East Timor, Haiti, United States, Senegal, Uzbekistan, Russia, Yemen, Netherlands, Burundi, Rwanda, Nepal, Syria, Samoa, Namibia, Equatorial Guinea, Luxembourg, Sierra Leone, Tajikistan, Mongolia, Panama, Burkina Faso, China, Chile, Philippines, Australia. A well-shaped logistics connection and a partnership network allow us to deliver our goods anywhere in the globe immediately without undermining product quality.
A special source of repute for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of manufacturing equipment.
All items from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is amounting every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as stay in control.
To request or order, call us by phone or write to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |