We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820058001
Description
Actuating control | single solenoid |
Return type | With air spring return |
Switching principle | 5/2 |
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated nitrile butadiene rubber |
Connector standard | ISO 15217 |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 1500 l/min |
Compressed air connection input | G 1/4 |
Compressed air connection output | G 1/4 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0820058001, catch up with FAMAGA, the world's key company of machine made equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of items and individual attention to each consumer. We esteem everyone, who worked with us - so, our regular clients obtain the most beneficial purchase terms and discounts on the factory-made equipment market. Today, there are more than 4000 such purchasers, and we constantly form new agreements. More than 600 affairs are settled per day, because FAMAGA operates all over the planet Germany, United Kingdom, Albania, Swaziland, Suriname, Samoa, Sri Lanka, The Gambia, Slovenia, Laos, Mozambique, Moldova, Botswana, Guatemala, Cyprus, Nigeria, Brunei, Montenegro, Togo, Mauritania, Sudan, Tajikistan, Israel, Libya, Guyana, Netherlands, Pakistan, Benin, Fiji, Antigua and Barbuda, Latvia, Thailand, Estonia, Peru, East Timor, Switzerland, Jordan, China, Costa Rica, Haiti, Luxembourg, Jamaica, Denmark, India, Cape Verde, Burkina Faso, Malaysia, Sweden. A well-developed logistics network and a partnership network guide us to deliver our elements anywhere in the world with no delay without undermining product quality.
A specific source of repute for FAMAGA is its employees, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the sphere of industrial equipment.
All outcomes from FAMAGA are ensured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this amount is increasing every day. We are proud that users choose FAMAGA again and again, and we strive to make more developed and technologically modern industrial equipment so as not to lower the bar.
To request or place an order, phone us or send a message to the online chat on our official website. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Sealing principle | Soft sealing |
Working pressure min./max. | See table |
Control pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 1500 l/min |
Connector standard | ISO 15217 |
Protection class with connection | IP65 |
Duty cycle | 100 % |
Mounting on manifold strip | P-strip |
Mounting screw tightening torque | 2,5 Nm |
Weight | See table |
Comment | An example configuration is illustrated. The delivered product may thus deviate from the illustration. |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Hydrogenated nitrile butadiene rubber |
Front plate | Polyamide fiber-glass reinforced |
Threaded bushing | Brass Die cast zinc, nickel-plated chrome-plated |