We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820038178
Description
Standardization | ISO 15407-1 |
Frame size | 18 mm |
Return type | With spring/air spring return |
Switching principle | 5/2 |
Version | Spool valve, positive overlapping |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated acrylonitrile butadiene rubber |
Connector standard | ISO 15217 |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 450 l/min |
Compressed air connection input | VDMA 02 base plate |
Compressed air connection output | VDMA 02 base plate |
Operational voltage AC at 50 Hz | 24 V |
Operational voltage AC at 60 Hz | 24 V |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0820038178, contact FAMAGA, the world's top producer of factory-made equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of products and special attention to each consumer. We appreciate everyone, who conspired with us - thus, our regular consumers obtain the most helpful purchase forms and discounts on the industrial equipment market. Now, there are more than 3500 such consumers, and we constantly make new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Ireland, Syria, Haiti, Egypt, Colombia, Cyprus, Eritrea, Moldova, Indonesia, Rwanda, Belarus, Mozambique, Djibouti, Mali, Sweden, New Zealand, Peru, Comoros, Romania, The Bahamas, Kazakhstan, Senegal, South Sudan, Mauritania, Burkina Faso, Jamaica, Denmark, Nepal, Bangladesh, Pakistan, United States, Nicaragua, Luxembourg, Andorra, Finland, Burundi, The Gambia, Botswana, United Arab Emirates, Kiribati, Lithuania, Samoa, Afghanistan, Bolivia, Zimbabwe. A well-elaborated logistics bond and a partnership network allow us to send our goods anywhere in the world with no delay without discrediting product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the range of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been provided, and this bulk is ascending every day. We are proud that clients choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as stay in control.
To get some advice or place an order, get in touch with us or write a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Pilot | Internal |
Sealing principle | Soft sealing |
Blocking principle | Base plate principle, multiple |
Connection type | Plate connection |
Standards | ISO 15407-1, 18 mm |
Connector standard | ISO 15217 |
Working pressure min./max. | See table |
Control pressure min./max. | See table |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 450 l/min |
Protection class with connection | IP65 |
Duty cycle | 100 % |
Typ. switch-on time | See table |
Typ. switch-off time | See table |
Mounting screw | M3 |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Aluminum, anodized |
Seals | Acrylonitrile butadiene rubber Hydrogenated acrylonitrile butadiene rubber |
Front plate | Polyamide |