We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822391909
Description
Piston rod modification | non-rotating,Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M6 |
Standardization | NFE 49004 |
Stroke | 80 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822391909, call FAMAGA, the world's central company of industrial equipment. Our company has worked for more than ten years - these are years of experience, which are illustrated in the quality of products and individual attention to each client. We value everyone, who cooperated with us - hence, our regular consumers receive the most favorable purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 4 thousand such purchasers, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA works all over the planet Germany, United Kingdom, South Korea, Tajikistan, Cambodia, Mozambique, Eritrea, Togo, Nicaragua, Israel, Morocco, Kazakhstan, Comoros, Madagascar, Peru, Slovakia, Haiti, Equatorial Guinea, Benin, Brunei, Guyana, El Salvador, Thailand, Monaco, Uruguay, Jamaica, Seychelles, Mexico, Panama, Macedonia, East Timor, Bosnia and Herzegovina, Egypt, Burkina Faso, The Gambia, Belize, Pakistan, Ukraine, Ireland, Qatar, Mauritania, China, Laos, Brazil, Guatemala, Swaziland, Luxembourg, North Korea. A well-elaborated logistics system and a partnership network help us to dispatch our goods anywhere in the world with no delay without undermining product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All outcomes from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is increasing every day. We are happy that clients choose FAMAGA again and again, and we are pleased to make more progressive and technologically modern industrial equipment so as stay in control.
To request or order, phone us or write a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |