We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821300331
Description
Parts | Filter pressure regulator |
Condensate drain | semi-automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
Pressure gauge | with pressure gauge |
Housing | Die cast zinc |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 1650 l/min |
Compressed air connection | G 3/8 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0821300331, communicate with FAMAGA, the world's principle company of mechanized equipment. Our company has progressed for more than ten years - these are years of experience, which are described in the quality of products and private attention to each orderer. We value everyone, who conspired with us - therefore, our regular consumers accept the most attractive purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such consumers, and we constantly form new agreements. More than 600 contracts are concluded per day, because FAMAGA works all over the earth Germany, United Kingdom, Venezuela, Ecuador, Georgia, Lesotho, Colombia, Kiribati, Austria, Laos, Portugal, Guinea, Netherlands, Thailand, Burundi, Cameroon, Haiti, Andorra, Tonga, Uganda, Mongolia, Mali, Jordan, North Korea, Brazil, Uzbekistan, Fiji, Rwanda, Afghanistan, Kenya, Nigeria, Algeria, Bosnia and Herzegovina, Argentina, Pakistan, Uruguay, Mexico, Sudan, Hungary, Iraq, Ghana, Kuwait, Norway, Mauritius, Equatorial Guinea, Bolivia, Senegal, Mauritania. A well-elaborated logistics series and a partnership network cheer us to dispatch our products anywhere in the planet immediately without discrediting product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only experts, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been provided, and this number is ascending every day. We are glad that buyers choose FAMAGA again and again, and we are happy to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or make a request, phone us or send a message to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 2 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 1650 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Pressure supply | single |
Filter reservoir volume | 25 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |
Filter insert | Polyethylene |