We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822394200
Description
Piston rod modification | Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M10x1,25 |
Standardization | NFE 49004 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822394200, get in touch with FAMAGA, the world's the best company of industrial equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of spare parts and private attention to each orderer. We admire everyone, who engaged with us - thus, our regular buyers pick up the most convenient purchase terms and discounts on the manufacturing equipment market. At this moment, there are more than 3500 such buyers, and we constantly form new agreements. More than 650 contracts are concluded per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Spain, El Salvador, Cameroon, Dominican Republic, Burma, Cape Verde, Latvia, Finland, Cuba, Myanmar, Papua New Guinea, Liberia, Nepal, The Gambia, Croatia, Sierra Leone, Panama, Cyprus, East Timor, Singapore, Albania, Benin, Georgia, Qatar, Egypt, Nicaragua, Ecuador, Mozambique, Ghana, Togo, Serbia, Zimbabwe, Turkmenistan, Ireland, Namibia, Dominica, Kazakhstan, Costa Rica, South Korea, Tajikistan, Indonesia, Australia, Bolivia, Algeria, Haiti, Macedonia, Swaziland, Hungary. A well-developed logistics link and a partnership network allow us to dispatch our products anywhere in the earth as soon as possible without compromising product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are verified - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are pleased that purchasers choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as stay in control.
To ask a question or book, call us by phone or send a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |