We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822390606
Description
Piston rod modification | non-rotating, with front plate,Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Standardization | NFE 49004 |
Stroke | 40 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822390606, contact FAMAGA, the world's the best distributor of industrialized equipment. Our company has progressed for more than ten years - these are years of experience, which are illustrated in the quality of products and individual attention to each user. We esteem everyone, who conspired with us - therefore, our regular buyers get the most favorable purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such buyers, and we constantly compose new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, Papua New Guinea, Tonga, Vietnam, Guinea, Monaco, Lesotho, Greece, Australia, Niger, Romania, Malawi, El Salvador, Equatorial Guinea, Denmark, Kenya, Saudi Arabia, India, Kiribati, Bhutan, Turkmenistan, Brazil, Israel, Eswatini, Macedonia, Libya, Tunisia, Croatia, Bulgaria, Morocco, Laos, Argentina, Belize, Georgia, Kyrgyzstan, Burkina Faso, Bosnia and Herzegovina, Nepal, Burundi, Ghana, Philippines, Uruguay, Costa Rica, Mongolia, Cameroon, Malta, Albania, Bangladesh, Afghanistan. A well-developed logistics connection and a partnership network guide us to conduct our products anywhere in the planet as soon as possible without compromising product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of factory-made equipment.
All items from FAMAGA are ensured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more developed and technologically developed industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or send a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Scraper | Polyurethane |