We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480680386
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 200 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480680386, contact FAMAGA, the world's major supplier of industrialized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are described in the quality of merchandises and special attention to each purchaser. We respect everyone, who cooperated with us - thus, our regular clients bring in the most desirable purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such buyers, and we constantly sign new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Japan, India, Peru, Liechtenstein, Georgia, Bhutan, Israel, Sierra Leone, Italy, Austria, Russia, Panama, Grenada, Nigeria, Zambia, Burundi, Namibia, Mali, Azerbaijan, Paraguay, Bulgaria, Iceland, Greece, Iran, Kenya, Djibouti, Bangladesh, Tajikistan, Slovakia, Czech Republic, Denmark, Switzerland, Turkey, Indonesia, Zimbabwe, Eswatini, Central African Republic, Togo, Belize, Niger, Ukraine, Macedonia, Mauritania, Malta, Suriname. A well-elaborated logistics connection and a partnership network let us to send our units anywhere in the world promptly without disreputing product quality.
A particular source of honor for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only experts, who already have experience in the field of factory-made equipment.
All items from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this amount is rising every day. We are proud that purchasers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To ask a question or order, contact us or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |