We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R402001019
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 40 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Polyurethane |
Corrosion resistance | corrosion-resistant |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R402001019, communicate with FAMAGA, the world's central supplier of manufacturing equipment. Our company has functioned for more than ten years - these are cycles of experience, which are described in the quality of products and special attention to each client. We appreciate everyone, who joined with us - therefore, our regular purchasers get the most helpful purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 750 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Malawi, Macedonia, Iceland, Syria, Tunisia, Grenada, Lesotho, France, Montenegro, Angola, Sierra Leone, Cameroon, Malta, Myanmar, Benin, Kyrgyzstan, Poland, Andorra, Namibia, India, Sweden, Algeria, Belarus, Uruguay, Liechtenstein, Gambia, Moldova, Antigua and Barbuda, Cyprus, Australia, Mauritius, Argentina, Burundi, Russia, Mali, Djibouti, Panama, Norway, Czech Republic, Zambia, Ireland, Sudan, Comoros, Austria, Iraq, Slovakia, Luxembourg. A well-built logistics system and a partnership network assist us to send our products anywhere in the world on-time without disreputing product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All items from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been supplied, and this number is amounting every day. We are glad that buyers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To request or make a request, get in touch with us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |