We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
R412019202 (MSC-DA-012-0080-HG-HM-HM-02-M-) AVENTICS - Minischlitten, Serie MSC-HG-HM
Part number
R412019202
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412019202 (MSC-DA-012-0080-HG-HM-HM-02-M-) AVENTICS - Minischlitten, Serie MSC-HG-HM R412019202, connect FAMAGA, the world's key producer of manufacturing equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of merchandises and particular attention to each consumer. We understand everyone, who worked with us - hence, our regular consumers get the most desirable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 4000 such clients, and we constantly sign new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Uzbekistan, Iceland, Greece, Zimbabwe, Andorra, Palestine, Burma, Iran, Croatia, Belgium, Denmark, Eswatini, Guinea, Mauritania, Kazakhstan, Afghanistan, Kenya, Slovakia, Laos, Costa Rica, Malawi, Seychelles, Equatorial Guinea, Jordan, Ecuador, Hungary, Tonga, Bolivia, Bangladesh, Gambia, Chile, Malta, Niger, Serbia, Togo, India, Ghana, Argentina, Burkina Faso, Bosnia and Herzegovina, Indonesia, Senegal, Jamaica, Kyrgyzstan, Samoa. A well-shaped logistics bond and a partnership network allow us to conduct our goods anywhere in the world immediately without undermining product quality.
A special source of repute for FAMAGA is its team members, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of machine made streamlined equipment.
All outputs from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is rising every day. We are proud that clients choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To get some advice or make a request, get in touch with us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | 0 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Repetitive precision | 0,02 mm |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Repetitive precision after 100 consecutive strokes: 0,02 mm Base with air connections at the back and sides Intermediate strokes can be configured. Scope of delivery: incl. centering rings R1 = stroke setting range for forward stroke R2 = stroke setting range for return stroke |
Material |
---|
Housing | Aluminum, anodized |
Piston rod | Stainless steel |
Front plate | Aluminum, anodized |
Seal | Polyurethane |
Ball rail table | Aluminum, anodized |
Guide rail | Steel, hardened |
Centering rings | Stainless steel |