We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
1331605000 (ICM-DA-016-0050-M) AVENTICS - Minizylinder, Serie ICM
Part number
1331605000
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 1331605000 (ICM-DA-016-0050-M) AVENTICS - Minizylinder, Serie ICM 1331605000, communicate with FAMAGA, the world's major supplier of factory-made equipment. Our company has lasted for more than ten years - these are years of experience, which are represented in the quality of products and personalseparate attention to each consumer. We esteem everyone, who cooperated with us - hence, our regular customers receive the most beneficial purchase forms and discounts on the manufacturing equipment market. Now, there are more than 4000 such customers, and we constantly make new agreements. More than 600 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Czech Republic, South Africa, Bahamas, Uruguay, Burundi, Mali, Nepal, Belgium, Central African Republic, Uganda, Oman, Ecuador, Tunisia, Equatorial Guinea, Angola, Chad, Chile, Argentina, Bulgaria, Kazakhstan, Tonga, United Arab Emirates, New Zealand, Costa Rica, Brazil, Kyrgyzstan, Bolivia, Iran, Belize, Haiti, Bosnia and Herzegovina, Finland, Kiribati, Ghana, Namibia, Moldova, Swaziland, Mongolia, Denmark. A well-developed logistics bond and a partnership network cheer us to deliver our products anywhere in the world quickly without disreputing product quality.
A particular source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only experts, who already have experience in the sphere of machine made streamlined equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been delivered, and this quantity is increasing every day. We are proud that users choose FAMAGA again and again, and we are happy to make more developed and technologically advanced industrial equipment so as keep on top of it.
To consult or make a request, phone us or write a message to the online chat on our site. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |