We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822391908
Description
Piston rod modification | non-rotating,Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M6 |
Standardization | NFE 49004 |
Stroke | 60 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822391908, contact FAMAGA, the world's top supplier of manufacturing equipment. Our company has lasted for more than ten years - these are ages of experience, which are illustrated in the quality of products and private attention to each buyer. We value everyone, who collaborated with us - hence, our regular buyers get the most favorable purchase terms and discounts on the factory-made equipment market. At present, there are more than 4 thousand such consumers, and we constantly sign new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the planet Germany, United Kingdom, Jordan, Benin, Chile, Cape Verde, Myanmar, United Arab Emirates, Sweden, Azerbaijan, Italy, South Korea, United States, South Sudan, Lithuania, Libya, Estonia, Morocco, East Timor, Honduras, Burma, Central African Republic, Madagascar, Malta, Vietnam, Grenada, Qatar, Liechtenstein, Pakistan, Zambia, Zimbabwe, Monaco, Mexico, Mongolia, The Bahamas, Burkina Faso, Nicaragua, Suriname, Jamaica, Yemen, Nepal, Switzerland, Russia, North Korea, Belarus, Armenia, Serbia, Comoros, Bolivia, Antigua and Barbuda. A well-developed logistics chains and a partnership network cheer us to send our items anywhere in the world on-time without damaging product quality.
A special source of repute for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of manufacturing equipment.
All products from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are happy that users choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as stay in control.
To get some advice or place an order, phone us or write to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |