We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822393207
Description
Piston rod modification | Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | NFE 49004 |
Stroke | 50 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822393207, catch up with FAMAGA, the world's leading provider of industrial equipment. Our company has worked for more than ten years - these are years of experience, which are expressed in the quality of goods and personalseparate attention to each client. We value everyone, who cooperated with us - so, our regular customers receive the most desirable purchase forms and discounts on the industrial equipment market. Now, there are more than 4500 such buyers, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA works all over the world Germany, United Kingdom, Portugal, Swaziland, Ecuador, Lebanon, Congo, The Gambia, Switzerland, Palestine, Grenada, North Korea, Seychelles, Albania, New Zealand, Suriname, Lithuania, Montenegro, Israel, Azerbaijan, Cameroon, Syria, Jordan, Saudi Arabia, Armenia, Bangladesh, Iraq, Brazil, Mozambique, Tanzania, Nigeria, Sierra Leone, South Sudan, Hungary, Belarus, Liechtenstein, Sweden, Malta, Kuwait, Uruguay, Djibouti, Antigua and Barbuda, Eswatini, Czech Republic, Zambia, Mali, Brunei, Iceland, Denmark. A well-elaborated logistics system and a partnership network help us to deliver our goods anywhere in the globe immediately without compromising product quality.
A specific source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of industrial equipment.
All items from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more developed and technologically developed industrial equipment so as not to lower the bar.
To ask a question or order, call us by phone or send a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |