We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822493102
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M8 |
Standardization | NFE 49004 |
Stroke | 15 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822493102, make contact with FAMAGA, the world's main retailer of streamlined equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of merchandises and private attention to each purchaser. We cherish everyone, who conspired with us - therefore, our regular consumers accept the most convenient purchase forms and discounts on the factory-made equipment market. At present, there are more than 4 thousand such clients, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the planet Germany, United Kingdom, San Marino, Albania, Latvia, Finland, Senegal, Bahamas, Equatorial Guinea, Botswana, Honduras, Morocco, United Arab Emirates, Eritrea, Estonia, Luxembourg, Kenya, Afghanistan, Kuwait, Pakistan, Brunei, Burkina Faso, Monaco, Chad, Chile, Switzerland, East Timor, Turkmenistan, Poland, Kazakhstan, Vietnam, Mexico, Egypt, Nepal, United States, Mauritania, Sierra Leone, Yemen, Syria, Serbia, North Korea, Panama, Ireland, Philippines, Dominica. A well-shaped logistics series and a partnership network guide us to dispatch our units anywhere in the world promptly without discrediting product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We request into our team only experts, who already have experience in the range of manufacturing equipment.
All merchandises from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are happy that users choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as stay in control.
To request or book, phone us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |