We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822066105
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Stroke | 160 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822066105, catch up with FAMAGA, the world's chief vendor of machine made equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of outcomes and personalseparate attention to each purchaser. We praise everyone, who engaged with us - thus, our regular consumers obtain the most attractive purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such consumers, and we constantly compose new agreements. More than 600 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Venezuela, Senegal, Eritrea, Canada, Dominican Republic, Andorra, Botswana, Japan, Luxembourg, Albania, Angola, Mexico, Bangladesh, Colombia, Austria, Nicaragua, Brunei, Chad, Peru, Estonia, Djibouti, Mongolia, The Bahamas, Georgia, Yemen, East Timor, Rwanda, Malaysia, Qatar, Ireland, Kuwait, United States, Belarus, Russia, Nepal, Haiti, Pakistan, Norway, China, Mozambique, Bolivia, Cameroon. A well-elaborated logistics link and a partnership network cheer us to deliver our goods anywhere in the globe promptly without discrediting product quality.
A particular source of good name for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of industrial equipment.
All goods from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are happy that buyers choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as stay in control.
To get some advice or order, phone us or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |