We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627308
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 160 mm |
Piston rod thread | M36x2 |
Standardization | ISO 15552 |
Stroke | 50 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480627308, contact FAMAGA, the world's primary provider of machine made equipment. Our company has existed for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and particular attention to each consumer. We admire everyone, who collaborated with us - thus, our regular buyers obtain the most convenient purchase forms and discounts on the industrial equipment market. At this time, there are more than 4500 such consumers, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Dominican Republic, Uruguay, Nicaragua, Japan, Honduras, Ukraine, Mauritania, South Sudan, Pakistan, United States, Malaysia, Yemen, Bosnia and Herzegovina, Turkey, The Gambia, Suriname, Azerbaijan, Eritrea, Benin, Samoa, Peru, Namibia, El Salvador, Cyprus, Sweden, Gambia, Kazakhstan, Switzerland, Bolivia, South Korea, Syria, Burkina Faso, Comoros, Philippines, East Timor, Antigua and Barbuda, Egypt, Armenia, Albania, Madagascar, Luxembourg, Eswatini. A well-shaped logistics bond and a partnership network assist us to dispatch our units anywhere in the globe promptly without undermining product quality.
A particular source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only experts, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been provided, and this quantity is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To request or make a request, contact us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel |