We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822391906
Description
Piston rod modification | non-rotating,Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M6 |
Standardization | NFE 49004 |
Stroke | 40 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822391906, connect FAMAGA, the world's top supplier of manufacturing equipment. Our company has lasted for more than ten years - these are ages of experience, which are expressed in the quality of goods and particular attention to each buyer. We cherish everyone, who collaborated with us - so, our regular clients get the most desirable purchase forms and discounts on the manufacturing equipment market. At present, there are more than 4500 such customers, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the earth Germany, United Kingdom, Lebanon, Chile, Cuba, Nigeria, Australia, Senegal, Libya, Mali, Burma, Cameroon, Belize, Uruguay, Russia, Antigua and Barbuda, Bosnia and Herzegovina, Peru, Tunisia, Kyrgyzstan, Sudan, Suriname, Qatar, Guyana, Malaysia, Uganda, The Bahamas, Czech Republic, Swaziland, Laos, Moldova, Burundi, The Gambia, Slovakia, Montenegro, Samoa, Brazil, Iraq, Turkey, Mauritius, Lithuania, Tanzania, Kiribati, Mozambique, Ukraine, Malta. A well-shaped logistics chains and a partnership network cheer us to conduct our items anywhere in the globe promptly without discrediting product quality.
A special source of honor for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All products from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are glad that users choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, get in touch with us or write to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |