We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822206408
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 250 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822206408, get in touch with FAMAGA, the world's major supplier of machine made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are illustrated in the quality of spare parts and particular attention to each client. We understand everyone, who joined with us - therefore, our regular consumers obtain the most desirable purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4000 such consumers, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Australia, Malawi, Belgium, Rwanda, France, Eritrea, Lesotho, Sudan, Ghana, Antigua and Barbuda, Mongolia, Kiribati, Bhutan, Djibouti, Nigeria, South Sudan, Seychelles, Iceland, Uganda, Uzbekistan, Fiji, Gambia, Samoa, Vietnam, Finland, United Arab Emirates, Bangladesh, Liechtenstein, Libya, Senegal, India, Estonia, Iran, Bosnia and Herzegovina, Afghanistan, Turkey, Switzerland, Jordan, Tanzania, Austria, Argentina, Chile, Syria, Niger, Laos. A well-elaborated logistics bond and a partnership network let us to ship our goods anywhere in the world promptly without discrediting product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only experts, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are pleased that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or book, contact us or write to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |