We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637880
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 50 mm |
Piston rod thread | M10 |
Standardization | ISO 15524 |
Stroke | 50 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480637880, contact FAMAGA, the world's influential producer of industrialized equipment. Our company has worked for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and particular attention to each purchaser. We appreciate everyone, who worked with us - hence, our regular buyers procure the most convenient purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Haiti, South Sudan, Indonesia, Romania, Ecuador, Canada, Cuba, Burma, Suriname, United Arab Emirates, Ireland, Samoa, Nicaragua, Lithuania, Benin, North Korea, Turkey, United States, Lebanon, Malta, The Gambia, Chile, Iceland, Slovakia, Japan, Nigeria, Guyana, Swaziland, Syria, Pakistan, Namibia, Costa Rica, Philippines, Australia, East Timor, Mongolia, Panama, Luxembourg, Nepal, Poland, Afghanistan, Georgia, Comoros, Guatemala. A well-shaped logistics connection and a partnership network guide us to dispatch our goods anywhere in the globe on-time without undermining product quality.
A specific source of repute for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only experts, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is amounting every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To request or make a request, get in touch with us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note the selection of fittings for strokes < 10 mm . |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |