We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822332407
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 160 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822332407, communicate with FAMAGA, the world's the best company of industrial equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of products and special attention to each buyer. We respect everyone, who cooperated with us - hence, our regular buyers pick up the most favorable purchase conditions and discounts on the industrial equipment market. Today, there are more than 4500 such consumers, and we constantly sign new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the world Germany, United Kingdom, Gambia, Peru, Myanmar, Switzerland, Laos, Denmark, Burkina Faso, Dominica, Kuwait, Luxembourg, Thailand, Suriname, Brazil, Colombia, Sweden, Andorra, Liechtenstein, Moldova, Pakistan, Equatorial Guinea, Japan, Montenegro, Monaco, Sudan, Ghana, Estonia, Tanzania, Nepal, New Zealand, Cyprus, United States, Panama, Djibouti, Bulgaria, Belarus, Madagascar, Vietnam, Tajikistan, Philippines, Botswana, Jamaica, Syria. A well-elaborated logistics system and a partnership network cheer us to send our items anywhere in the world quickly without damaging product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the direction of industrial equipment.
All outcomes from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as stay in control.
To get some advice or make a request, call us by phone or send a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |