We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412019841
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M8 |
Standardization | ISO 15524 |
Stroke | 100 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412019841, call FAMAGA, the world's the best retailer of mechanized equipment. Our company has advanced for more than ten years - these are years of experience, which are symbolized in the quality of merchandises and individual attention to each customer. We value everyone, who collaborated with us - therefore, our regular buyers bring in the most flexible purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the globe Germany, United Kingdom, Gabon, Mongolia, Nepal, Mexico, Australia, Tunisia, Kyrgyzstan, Congo, Uzbekistan, Swaziland, Guyana, Algeria, Rwanda, Lithuania, Equatorial Guinea, Dominica, Luxembourg, Serbia, Vietnam, Armenia, Japan, The Gambia, Yemen, Libya, United Arab Emirates, Switzerland, Poland, Mauritius, Mozambique, Madagascar, Panama, Russia, Denmark, Comoros, Namibia, Mauritania, Syria, Egypt, Zambia. A well-shaped logistics chains and a partnership network allow us to deliver our goods anywhere in the world as soon as possible without discrediting product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the sphere of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is increasing every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To inquire or order, call us by phone or write to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |