We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001313
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M6 |
Standardization | ISO 21287 |
Stroke | 30 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R422001313, communicate with FAMAGA, the world's principle provider of mechanized equipment. Our company has existed for more than ten years - these are ages of experience, which are expressed in the quality of goods and individual attention to each buyer. We esteem everyone, who collaborated with us - so, our regular purchasers receive the most favorable purchase terms and discounts on the industrial equipment market. Nowadays, there are more than 4 thousand such clients, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Nepal, Costa Rica, Latvia, Mexico, Afghanistan, Honduras, Antigua and Barbuda, Malaysia, Guinea, Serbia, Moldova, Vietnam, Yemen, Eritrea, Gambia, Indonesia, Japan, Greece, Burkina Faso, Ukraine, Argentina, Bosnia and Herzegovina, Ireland, Poland, United Arab Emirates, Mongolia, Cyprus, Mauritania, Angola, Sierra Leone, Djibouti, South Sudan, Israel, Samoa, South Korea, Philippines, Syria, Albania, Tajikistan, Sweden. A advanced logistics chains and a partnership network assist us to conduct our elements anywhere in the globe on-time without compromising product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the range of factory-made equipment.
All goods from FAMAGA are affirmed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this quantity is ascending every day. We are pleased that consumers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To get some advice or make a request, phone us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Front plate | Aluminum |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |