We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5894420220
Description
Return type | With spring return |
Switching principle | 3/2 |
Version | Poppet valve |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 520 l/min |
Compressed air connection input | Ø 6x1 |
Compressed air connection output | Ø 6x1 |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 5894420220, make contact with FAMAGA, the world's key producer of streamlined equipment. Our company has progressed for more than ten years - these are cycles of experience, which are depicted in the quality of items and private attention to each consumer. We praise everyone, who conspired with us - therefore, our regular clients get the most attractive purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Guyana, Honduras, Gambia, Bahamas, Cuba, Saudi Arabia, Dominican Republic, Myanmar, Fiji, Mali, Guatemala, Eswatini, Indonesia, Central African Republic, South Korea, Liberia, Angola, Monaco, Djibouti, Panama, Iran, Haiti, Czech Republic, Uruguay, Switzerland, Bolivia, Dominica, Tajikistan, Burkina Faso, Bulgaria, Mauritania, Cyprus, Mauritius, Estonia, Comoros, Peru, Iraq, Kuwait, Zimbabwe, United States, Finland, Yemen, Samoa, India. A well-built logistics series and a partnership network allow us to conduct our items anywhere in the planet on-time without disreputing product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the range of factory-made equipment.
All goods from FAMAGA are ensured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this amount is ascending every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more advanced and technologically innovative industrial equipment so as not to lower the bar.
To consult or book, contact us or send a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Poppet valve |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Working pressure min./max. | 0,5 ... 8 bar |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | See table |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 18 ms |
Typ. switch-off time | 16 ms |
Weight | 0,093 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
At an ambient temperature of 40 °C the max. working pressure is 10 bar . Versions with voltage of less than 50 V DC do not have a protective ground. Working pressure with vacuum operation, connection 1: min. 3 bar , connection 3: min. - 0.95 bar The control pressure must be at least as high as the working pressure. |
Material |
---|
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber Polyurethane |