We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822082207
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 160 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822082207, call FAMAGA, the world's the best provider of industrial equipment. Our company has worked for more than ten years - these are years of experience, which are illustrated in the quality of items and special attention to each buyer. We respect everyone, who collaborated with us - therefore, our regular consumers pick up the most convenient purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 4000 such consumers, and we constantly sign new agreements. More than 650 transactions are made per day, because FAMAGA delivers all over the world Germany, United Kingdom, Bosnia and Herzegovina, Peru, Zimbabwe, Turkey, Bolivia, Bulgaria, Vietnam, Swaziland, Japan, Norway, Myanmar, Tanzania, Liechtenstein, Paraguay, Zambia, Haiti, Malawi, Kuwait, Tunisia, Malaysia, New Zealand, Uganda, Senegal, Cyprus, Iran, Mauritius, Kazakhstan, Nigeria, Guatemala, Tonga, Kiribati, Sudan, Iraq, Greece, Luxembourg, Austria, Finland, Russia, Uruguay, Jordan, Chile, Laos, Moldova, Sweden, Niger, Lithuania. A well-elaborated logistics system and a partnership network cheer us to send our goods anywhere in the globe as soon as possible without discrediting product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this number is ascending every day. We are happy that customers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |