We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637879
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 50 mm |
Piston rod thread | M10 |
Standardization | ISO 15524 |
Stroke | 40 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480637879, call FAMAGA, the world's principle supplier of mechanized equipment. Our company has lasted for more than ten years - these are years of experience, which are expressed in the quality of merchandises and special attention to each client. We value everyone, who engaged with us - therefore, our regular buyers obtain the most desirable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 650 contracts are concluded per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Syria, Malta, Guyana, North Korea, Nicaragua, Jordan, Canada, Suriname, Uruguay, Singapore, Lithuania, Central African Republic, Dominica, Togo, Malaysia, Guatemala, Finland, Zimbabwe, Czech Republic, Bolivia, Kiribati, The Bahamas, Jamaica, Indonesia, Djibouti, Tanzania, India, Pakistan, Costa Rica, Kuwait, Bosnia and Herzegovina, Egypt, Peru, Ireland, Uganda, Belarus, Benin. A well-built logistics connection and a partnership network let us to dispatch our elements anywhere in the earth promptly without discrediting product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the sphere of machine made streamlined equipment.
All products from FAMAGA are assured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that users choose FAMAGA again and again, and we are eager to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To consult or place an order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note the selection of fittings for strokes < 10 mm . |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |