We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822206404
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 100 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822206404, make contact with FAMAGA, the world's the best vendor of mechanized equipment. Our company has operated for more than ten years - these are years of experience, which are illustrated in the quality of goods and individual attention to each purchaser. We understand everyone, who engaged with us - therefore, our regular purchasers get the most desirable purchase terms and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Congo, Eswatini, Denmark, Lesotho, Zambia, Kenya, Myanmar, Malta, Morocco, Malawi, Bhutan, Ghana, Monaco, Belize, Benin, Iraq, Kazakhstan, Ecuador, Jamaica, Equatorial Guinea, North Korea, Madagascar, Bangladesh, Bosnia and Herzegovina, Syria, Iceland, Chad, Angola, Turkey, Zimbabwe, Czech Republic, New Zealand, Moldova, Ukraine, Nigeria, Central African Republic, Iran, Tonga, Sudan, Jordan, Hungary, Mali, Comoros, Antigua and Barbuda, Tanzania, Poland, India, Norway. A well-built logistics link and a partnership network let us to conduct our items anywhere in the world as soon as possible without disreputing product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We request into our team only professionals, who already have experience in the field of factory-made equipment.
All items from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or book, contact us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |