We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412019840
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M8 |
Standardization | ISO 15524 |
Stroke | 80 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412019840, contact FAMAGA, the world's influential distributor of machine made equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of goods and private attention to each orderer. We understand everyone, who conspired with us - so, our regular buyers procure the most favorable purchase terms and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly form new agreements. More than 700 purchases are terminated per day, because FAMAGA operates all over the globe Germany, United Kingdom, Angola, Egypt, Guatemala, Indonesia, Burkina Faso, Botswana, Romania, United Arab Emirates, Slovenia, Ukraine, Serbia, Antigua and Barbuda, Iran, Liberia, Guinea, Luxembourg, Greece, Benin, Netherlands, Georgia, Panama, Jamaica, Afghanistan, Switzerland, Laos, Russia, Vietnam, Zimbabwe, Cameroon, Morocco, South Korea, Mexico, Cyprus, Malta, United States, Kenya, Albania, East Timor, Swaziland, Bosnia and Herzegovina, Finland, Mauritania, Algeria, Seychelles, Belarus. A well-built logistics network and a partnership network guide us to ship our elements anywhere in the globe quickly without damaging product quality.
A specific source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only professionals, who already have experience in the range of manufacturing equipment.
All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this amount is growing every day. We are pleased that users choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or order, phone us or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |