We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226745500
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 150 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 5226745500, reach FAMAGA, the world's main producer of industrialized equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of outputs and private attention to each purchaser. We respect everyone, who liased with us - therefore, our regular clients receive the most acceptable purchase terms and discounts on the manufacturing equipment market. At this moment, there are more than 4 thousand such purchasers, and we constantly compose new agreements. More than 650 contracts are concluded per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Spain, Mali, Equatorial Guinea, Dominican Republic, Sudan, Colombia, Sierra Leone, Slovenia, Uruguay, Ukraine, Rwanda, Comoros, Senegal, Benin, Lebanon, Turkmenistan, Vietnam, Bulgaria, Morocco, Central African Republic, Argentina, Israel, Moldova, Liberia, Nicaragua, Czech Republic, Swaziland, Kyrgyzstan, Kiribati, Ireland, Andorra, Nigeria, Bosnia and Herzegovina, El Salvador, Hungary, Guatemala, Uganda, Seychelles, Thailand, Cape Verde, Eswatini, Lithuania, Iran, Algeria, Zambia, Cameroon, Iraq. A well-elaborated logistics link and a partnership network let us to conduct our items anywhere in the earth with no delay without disreputing product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All goods from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is ascending every day. We are glad that customers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or make a request, get in touch with us or write to the online chat on our site. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders can be generated in the Internet configurator. ATEX ID: II 2G c IIB T4 II 2D c IP65 T125°C X The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |