We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
R422001272 (CCI-DA-016-0010-00712241100002) AVENTICS - Kompaktzylinder ISO 21287, Serie CCI
Part number
R422001272
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R422001272 (CCI-DA-016-0010-00712241100002) AVENTICS - Kompaktzylinder ISO 21287, Serie CCI R422001272, make contact with FAMAGA, the world's principle provider of industrial equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of goods and individual attention to each buyer. We admire everyone, who collaborated with us - so, our regular purchasers get the most favorable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4500 such purchasers, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Côte d\'Ivoire, Macedonia, Qatar, Iceland, Congo, Nigeria, Morocco, Eritrea, Grenada, Guyana, Colombia, Egypt, China, Oman, Thailand, Romania, Ukraine, Netherlands, Russia, Gambia, United States, Slovakia, Jamaica, Bolivia, Cameroon, Sweden, South Sudan, Indonesia, East Timor, Guatemala, Philippines, The Gambia, Pakistan, United Arab Emirates, Serbia, Uganda, Yemen, Tajikistan, Mauritania, Lithuania, Belarus, Zimbabwe, Mexico, Rwanda. A advanced logistics chains and a partnership network help us to ship our products anywhere in the globe promptly without compromising product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the range of factory-made equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been provided, and this bulk is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as stay in control.
To request or book, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Front plate | Aluminum |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |