We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480177304
Description
Functional principle | double-acting |
Cushioning | pneumatically |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | 1-14 UNF |
Stroke | 50.8 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 1/2 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480177304, get in touch with FAMAGA, the world's dominant company of mechanized equipment. Our company has existed for more than ten years - these are cycles of experience, which are illustrated in the quality of products and particular attention to each purchaser. We value everyone, who engaged with us - so, our regular buyers receive the most flexible purchase forms and discounts on the machine made streamlined equipment market. Today, there are more than 4 thousand such consumers, and we constantly make new agreements. More than 750 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Yemen, Libya, Suriname, United Arab Emirates, Morocco, Russia, Mongolia, Uzbekistan, Mali, Colombia, Thailand, Tonga, Armenia, Iceland, Brunei, Panama, Philippines, Brazil, Samoa, Sierra Leone, Liberia, Israel, Bulgaria, South Korea, Moldova, Luxembourg, Turkmenistan, Jordan, Rwanda, Chile, Equatorial Guinea, Kazakhstan, Uruguay, Laos, Macedonia, Ireland, Antigua and Barbuda, East Timor, Cameroon, Guatemala, Norway, Andorra. A well-shaped logistics connection and a partnership network assist us to dispatch our products anywhere in the earth promptly without undermining product quality.
A particular source of repute for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the direction of factory-made equipment.
All spare parts from FAMAGA are verified - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been delivered, and this amount is ascending every day. We are glad that purchasers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as stay in control.
To request or order, phone us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |