We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822206402
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 50 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822206402, make contact with FAMAGA, the world's leading producer of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are depicted in the quality of goods and particular attention to each consumer. We praise everyone, who liased with us - thus, our regular consumers bring in the most favorable purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such consumers, and we constantly sign new agreements. More than 650 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, San Marino, East Timor, Papua New Guinea, Namibia, Slovenia, Macedonia, Mozambique, Latvia, Romania, Burundi, Canada, Finland, Burkina Faso, Poland, Oman, Mali, Mongolia, Yemen, Austria, Suriname, Chad, Uruguay, Brunei, Rwanda, Vietnam, Cape Verde, Sweden, Nepal, Cyprus, Haiti, Philippines, Seychelles, Egypt, Senegal, Estonia, United Arab Emirates, Serbia, Turkey, United States, Samoa. A well-elaborated logistics series and a partnership network let us to ship our goods anywhere in the globe promptly without discrediting product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only experts, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are pleased that consumers choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as stay in control.
To get some advice or book, call us by phone or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |