We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822206401
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 25 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822206401, catch up with FAMAGA, the world's major supplier of machine made equipment. Our company has functioned for more than ten years - these are ages of experience, which are depicted in the quality of outcomes and particular attention to each client. We praise everyone, who joined with us - thus, our regular consumers obtain the most favorable purchase forms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such consumers, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Norway, Indonesia, Sudan, Suriname, Dominican Republic, Mauritius, Mali, Colombia, Afghanistan, Austria, China, Nepal, Mexico, Tanzania, Poland, Belarus, Japan, Belize, Croatia, Turkey, Tajikistan, Montenegro, South Sudan, The Bahamas, Guatemala, Cyprus, Iceland, Russia, Bolivia, Guyana, Eswatini, Haiti, Jamaica, Swaziland, Syria, Samoa, Zambia, Kuwait, Israel, Yemen, Armenia, Switzerland, United States, Georgia, Costa Rica, Qatar, South Korea, Estonia, Kiribati. A well-elaborated logistics bond and a partnership network assist us to ship our units anywhere in the globe on-time without discrediting product quality.
A specific source of pride for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of industrial equipment.
All goods from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are happy that customers choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as stay in control.
To get some advice or order, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |