We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226744600
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 60 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 5226744600, make contact with FAMAGA, the world's the best provider of streamlined equipment. Our company has functioned for more than ten years - these are ages of experience, which are illustrated in the quality of outcomes and personalseparate attention to each buyer. We understand everyone, who conspired with us - thus, our regular buyers pick up the most beneficial purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4500 such customers, and we constantly sign new agreements. More than 700 contracts are concluded per day, because FAMAGA delivers all over the world Germany, United Kingdom, Namibia, Zimbabwe, Slovenia, Bahrain, Cuba, Austria, Romania, Mauritius, Sudan, Egypt, Belgium, Japan, East Timor, Mali, Suriname, Canada, Kuwait, Malaysia, Ukraine, The Bahamas, Serbia, Singapore, The Gambia, Iraq, Switzerland, Cyprus, Brunei, Finland, Israel, Bolivia, United States, Panama, Greece, Croatia, Estonia, Nicaragua, Tunisia, Comoros, Czech Republic, Russia, Australia, South Sudan, Chile, Benin, Madagascar, Cape Verde, Tanzania, Albania, Morocco, Belarus, Niger. A well-shaped logistics series and a partnership network let us to send our items anywhere in the planet promptly without damaging product quality.
A special source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of industrial equipment.
All items from FAMAGA are assured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is growing every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more exceptional and technologically modern industrial equipment so as stay in control.
To inquire or book, call us by phone or write to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders can be generated in the Internet configurator. ATEX ID: II 2G c IIB T4 II 2D c IP65 T125°C X The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |