We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1331202000
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 25 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Polyurethane |
Corrosion resistance | corrosion-resistant |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 1331202000, make contact with FAMAGA, the world's key provider of machine made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are described in the quality of goods and special attention to each purchaser. We cherish everyone, who collaborated with us - thus, our regular consumers get the most helpful purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 3500 such buyers, and we constantly arrange new agreements. More than 750 agreements are achieved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Argentina, Tajikistan, Colombia, San Marino, Bahamas, Kazakhstan, Eritrea, Costa Rica, Equatorial Guinea, Mauritania, Lebanon, Monaco, Mauritius, Namibia, Sweden, Oman, Nepal, Qatar, Macedonia, Guyana, Peru, Romania, Georgia, Sierra Leone, Bolivia, Panama, Yemen, Samoa, Rwanda, Togo, Ireland, United Arab Emirates, Mali, Malaysia, Luxembourg, Fiji, Cameroon, Mexico, Libya, El Salvador, New Zealand, Russia, Hungary, United States, Indonesia, Estonia, Norway, Finland, Suriname, Burkina Faso, Slovakia. A well-elaborated logistics connection and a partnership network help us to send our goods anywhere in the globe immediately without damaging product quality.
A specific source of honor for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the direction of manufacturing equipment.
All goods from FAMAGA are verified - we are responsible for the result of our work. At this moment, more than 10 million units of products have been provided, and this amount is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are glad to make more progressive and technologically innovative industrial equipment so as stay in control.
To get some advice or order, get in touch with us or send a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |