We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001784
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M8x1,25 |
Standardization | ISO 21287 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R422001784, contact FAMAGA, the world's major distributor of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of goods and private attention to each buyer. We understand everyone, who conspired with us - so, our regular buyers pick up the most favorable purchase forms and discounts on the industrial equipment market. Today, there are more than 4000 such buyers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Venezuela, Croatia, Cape Verde, Dominican Republic, Togo, Netherlands, Finland, Honduras, Armenia, Botswana, Eswatini, Bosnia and Herzegovina, Andorra, North Korea, Afghanistan, Iran, United States, East Timor, Albania, Poland, Swaziland, Madagascar, Ukraine, Haiti, Kuwait, Uzbekistan, Indonesia, Sierra Leone, Mexico, Dominica, Guatemala, Czech Republic, Qatar, Belarus, Serbia, Mauritania, Philippines, El Salvador, Kiribati, Sweden, Senegal, Costa Rica, Greece, Cyprus, Malaysia. A well-built logistics chains and a partnership network let us to send our products anywhere in the globe promptly without damaging product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of factory-made equipment.
All items from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or make a request, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. With cylinders with external thread extension, dimension "A" is increased by the value of the thread extension. With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |