We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820260701
Description
Actuating control | single solenoid |
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber |
Nominal flow Qn | 800 l/min |
Compressed air connection input | G 1/8 |
Compressed air connection output | G 1/8 |
Activation | pneumatically |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0820260701, call FAMAGA, the world's main producer of industrialized equipment. Our company has advanced for more than ten years - these are ages of experience, which are symbolized in the quality of products and private attention to each customer. We respect everyone, who conspired with us - so, our regular purchasers obtain the most flexible purchase terms and discounts on the industrial equipment market. At present, there are more than 4500 such consumers, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Latvia, Syria, Suriname, Congo, Tajikistan, Guinea, Bangladesh, Slovenia, Turkey, Estonia, Bulgaria, Ghana, Eritrea, India, Zimbabwe, El Salvador, Vietnam, Andorra, New Zealand, Samoa, Djibouti, Niger, Switzerland, United States, Panama, Zambia, Angola, Cyprus, Indonesia, Costa Rica, Croatia, Afghanistan, Poland, Central African Republic, Benin, Peru, Belarus, The Gambia, Brunei, Madagascar. A well-built logistics link and a partnership network guide us to conduct our elements anywhere in the earth promptly without damaging product quality.
A specific source of good name for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are glad that purchasers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To request or book, contact us or send a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | pneumatically |
Pilot | External |
Sealing principle | Soft sealing |
Blocking principle | Plate principle |
Flow rate value | 800 l/min |
Working pressure min./max. | See table |
Control pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Mounting on manifold strip | P-strip |
Mounting screw tightening torque | 2 Nm |
Weight | 0,09 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Caution: The minimum control pressure depends on the working pressure (see "Control pressure" diagram below). |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber |
Front plate | Polyamide fiber-glass reinforced |
Threaded bushing | Brass Die cast zinc, chrome-plated nickel-plated |