We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822306209
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 320 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822306209, reach FAMAGA, the world's leading distributor of manufacturing equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of outputs and special attention to each user. We esteem everyone, who cooperated with us - therefore, our regular consumers receive the most convenient purchase forms and discounts on the factory-made equipment market. Today, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, Guinea-Bissau, Kenya, Colombia, Iceland, Namibia, Niger, Afghanistan, The Bahamas, Armenia, Estonia, Turkmenistan, Czech Republic, Guyana, Laos, Romania, Bulgaria, Liechtenstein, Mexico, Bangladesh, Uzbekistan, Chad, Denmark, Peru, Jordan, India, Belize, Azerbaijan, Tanzania, Sudan, South Sudan, Israel, Burkina Faso, Kuwait, Bosnia and Herzegovina, Belarus, Moldova, Senegal, Mongolia, Djibouti, Argentina, Equatorial Guinea, Austria, Comoros. A well-elaborated logistics network and a partnership network cheer us to send our units anywhere in the planet on-time without discrediting product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All products from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are glad that consumers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as not to lower the bar.
To get some advice or make a request, call us by phone or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |