We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226636000
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 200 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 5226636000, connect FAMAGA, the world's dominant retailer of industrialized equipment. Our company has worked for more than ten years - these are ages of experience, which are portrayed in the quality of merchandises and personalseparate attention to each customer. We understand everyone, who collaborated with us - therefore, our regular consumers bring in the most attractive purchase forms and discounts on the industrial equipment market. Today, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 600 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Cyprus, Senegal, Central African Republic, Myanmar, Sierra Leone, Congo, Portugal, Botswana, New Zealand, Suriname, Argentina, Bahamas, Benin, Macedonia, Bangladesh, Peru, Namibia, Lithuania, Saudi Arabia, Fiji, Kazakhstan, Syria, Hungary, Australia, Slovakia, Montenegro, Laos, Guatemala, Antigua and Barbuda, Moldova, India, Brazil, Tunisia, Belize, China, Uganda, Kuwait, Bosnia and Herzegovina, Ireland, Ukraine, Kenya. A advanced logistics series and a partnership network let us to deliver our units anywhere in the world on-time without undermining product quality.
A specific source of repute for FAMAGA is its employees, each of whom contributes to our work. We call into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that clients choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, phone us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |