We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637877
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 50 mm |
Piston rod thread | M10 |
Standardization | ISO 15524 |
Stroke | 25 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480637877, catch up with FAMAGA, the world's dominant vendor of factory-made equipment. Our company has advanced for more than ten years - these are years of experience, which are described in the quality of spare parts and private attention to each purchaser. We esteem everyone, who worked with us - thus, our regular consumers bring in the most convenient purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such consumers, and we constantly make new agreements. More than 700 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, China, Spain, Uganda, Bosnia and Herzegovina, Malawi, Palestine, Bhutan, Guinea, Burkina Faso, Iraq, Zimbabwe, Rwanda, Romania, Slovenia, South Korea, Zambia, Honduras, Ireland, Israel, Slovakia, Ecuador, Philippines, Australia, Liberia, Kazakhstan, Algeria, Paraguay, Uruguay, Brazil, Seychelles, Eswatini, Kyrgyzstan, Greece, Czech Republic, Tanzania, Tonga, Samoa, Burundi, Mauritius, Andorra, Mozambique, Laos, Mongolia. A well-shaped logistics network and a partnership network let us to ship our products anywhere in the planet promptly without disreputing product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only experts, who already have experience in the sphere of manufacturing equipment.
All spare parts from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are pleased that buyers choose FAMAGA again and again, and we are happy to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To ask a question or book, contact us or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note the selection of fittings for strokes < 10 mm . |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |