We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480165969
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 200 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480165969, communicate with FAMAGA, the world's major provider of streamlined equipment. Our company has advanced for more than ten years - these are cycles of experience, which are described in the quality of spare parts and personalseparate attention to each client. We cherish everyone, who liased with us - hence, our regular purchasers bring in the most helpful purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such consumers, and we constantly compose new agreements. More than 750 purchases are terminated per day, because FAMAGA operates all over the earth Germany, United Kingdom, France, Burkina Faso, Congo, Lebanon, Liberia, Tonga, Burundi, Malta, Cameroon, Sweden, Uzbekistan, Turkmenistan, Uganda, Angola, Dominica, Austria, Swaziland, Central African Republic, Australia, Kiribati, Albania, Azerbaijan, Eswatini, Sierra Leone, Malaysia, Algeria, North Korea, Georgia, Thailand, Mauritius, Argentina, Bangladesh, Ghana, Sudan, Moldova, Greece, Latvia, Armenia, Kenya, Mali, East Timor, Paraguay, Libya. A well-elaborated logistics connection and a partnership network allow us to send our products anywhere in the world with no delay without damaging product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the direction of industrial equipment.
All items from FAMAGA are affirmed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is growing every day. We are pleased that buyers choose FAMAGA again and again, and we are pleased to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To inquire or book, contact us or write to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |