We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821300316
Description
Parts | Filter pressure regulator |
Condensate drain | semi-automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
Housing | Die cast zinc |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 1650 l/min |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0821300316, make contact with FAMAGA, the world's top vendor of machine made equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of goods and private attention to each purchaser. We admire everyone, who collaborated with us - thus, our regular clients pick up the most attractive purchase forms and discounts on the manufacturing equipment market. At present, there are more than 3500 such clients, and we constantly make new agreements. More than 600 agreements are achieved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Australia, Guyana, El Salvador, Albania, Djibouti, Serbia, Luxembourg, Honduras, Panama, Singapore, Kiribati, Eritrea, Mauritius, Oman, Liechtenstein, Nicaragua, Gambia, Egypt, Czech Republic, Switzerland, Pakistan, Laos, Philippines, Peru, Jamaica, Armenia, Fiji, Madagascar, Croatia, Haiti, Qatar, Indonesia, Mexico, Algeria, Belarus, United States, Afghanistan, United Arab Emirates, East Timor, Syria. A well-shaped logistics chains and a partnership network let us to dispatch our goods anywhere in the earth quickly without damaging product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are verified - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this bulk is increasing every day. We are pleased that users choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as stay in control.
To inquire or book, phone us or write a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 2 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 1650 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | 0,5 ... 10 bar |
Pressure supply | single |
Filter reservoir volume | 25 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Filter insert | Polyethylene |