We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226635750
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 175 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 5226635750, communicate with FAMAGA, the world's main provider of mechanized equipment. Our company has lasted for more than ten years - these are ages of experience, which are depicted in the quality of merchandises and personalseparate attention to each buyer. We value everyone, who collaborated with us - so, our regular buyers obtain the most convenient purchase conditions and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such customers, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Barbados, North Korea, Tanzania, Palestine, Hungary, Namibia, Slovakia, Niger, Liechtenstein, Mongolia, Belize, Benin, Bhutan, Jordan, Malawi, Ecuador, Qatar, Gambia, Philippines, Ghana, Nepal, Lithuania, Kyrgyzstan, Belarus, Kiribati, Chile, Macedonia, Ireland, Andorra, Bangladesh, India, Croatia, Nigeria, Sudan, Uruguay, Bulgaria, Paraguay, Central African Republic, Laos, Tonga, Malaysia. A well-developed logistics chains and a partnership network cheer us to deliver our products anywhere in the world on-time without disreputing product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the field of industrial equipment.
All merchandises from FAMAGA are verified - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this quantity is amounting every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To get some advice or make a request, phone us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |