We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001604
Description
Piston rod modification | through |
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M6 |
Standardization | ISO 21287 |
Stroke | 10 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R422001604, connect FAMAGA, the world's key distributor of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are illustrated in the quality of products and private attention to each consumer. We value everyone, who liased with us - thus, our regular consumers bring in the most favorable purchase forms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 3500 such customers, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, Slovenia, China, Peru, Monaco, Indonesia, Mozambique, Latvia, Afghanistan, Malaysia, Egypt, Panama, Czech Republic, South Sudan, Vietnam, Cyprus, Eritrea, Armenia, Grenada, Jamaica, Malawi, Macedonia, Dominica, Sierra Leone, Burkina Faso, Swaziland, Montenegro, Botswana, Madagascar, Pakistan, Paraguay, Estonia, Burundi, Benin, Kiribati, Ireland, Tunisia, El Salvador, East Timor, Morocco, Georgia, Mauritania, Cape Verde, India. A advanced logistics link and a partnership network allow us to dispatch our goods anywhere in the world promptly without undermining product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this number is ascending every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as stay in control.
To ask a question or place an order, contact us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. Piston Ø 50/63, stroke < 5 mm: AF= 11 mm Piston Ø 80/100, stroke < 5 mm: AF= 15 mm |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |