We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822330410
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 10 mm |
Piston rod thread | M4 |
Standardization | ISO 6432 |
Stroke | 250 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822330410, communicate with FAMAGA, the world's prime vendor of machine made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of products and private attention to each purchaser. We value everyone, who worked with us - therefore, our regular buyers get the most flexible purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4000 such buyers, and we constantly compose new agreements. More than 700 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Burma, Nigeria, Lithuania, Turkmenistan, Turkey, Paraguay, Bulgaria, Montenegro, Denmark, Hungary, Norway, Mexico, Burundi, Ukraine, Tanzania, Liberia, Serbia, Netherlands, North Korea, Japan, Cape Verde, Sudan, Chad, Kyrgyzstan, Australia, Yemen, Moldova, Senegal, Argentina, Latvia, Mongolia, Georgia, Brazil, Estonia, Slovakia, Croatia, Antigua and Barbuda, Algeria, Central African Republic, Malta, Israel, Iceland, Luxembourg. A well-developed logistics chains and a partnership network help us to dispatch our elements anywhere in the planet promptly without compromising product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the field of factory-made equipment.
All items from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is rising every day. We are glad that consumers choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as not to lower the bar.
To ask a question or make a request, contact us or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |