We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R402000915
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Stroke | 50 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R402000915, reach FAMAGA, the world's central provider of manufacturing equipment. Our company has functioned for more than ten years - these are ages of experience, which are described in the quality of outputs and personalseparate attention to each buyer. We appreciate everyone, who joined with us - therefore, our regular consumers accept the most helpful purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such consumers, and we constantly compose new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Jordan, Israel, Paraguay, Tanzania, Sri Lanka, Sudan, Bosnia and Herzegovina, Singapore, Sierra Leone, Greece, Australia, Argentina, Myanmar, Chad, Mauritius, Kiribati, Brazil, Uzbekistan, Namibia, Andorra, Poland, Malaysia, Laos, Belarus, Burundi, Tonga, Central African Republic, Nicaragua, Gambia, Bulgaria, The Bahamas, Montenegro, Haiti, Kyrgyzstan, Estonia, Senegal, Burkina Faso, Thailand, Peru, Armenia, Norway, Qatar, Mongolia, New Zealand, Rwanda, South Korea. A well-elaborated logistics system and a partnership network help us to deliver our goods anywhere in the world as soon as possible without discrediting product quality.
A specific source of good name for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been supplied, and this number is ascending every day. We are glad that users choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To get some advice or make a request, get in touch with us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Stainless steel |
Bearing | Sintered bronze |
Piston rod | Stainless steel |