We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472411257
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 350 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 7472411257, reach FAMAGA, the world's principle vendor of factory-made equipment. Our company has lasted for more than ten years - these are ages of experience, which are described in the quality of outputs and private attention to each buyer. We admire everyone, who engaged with us - thus, our regular clients obtain the most favorable purchase forms and discounts on the manufacturing equipment market. Today, there are more than 4500 such customers, and we constantly arrange new agreements. More than 700 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, Qatar, Afghanistan, Yemen, Cape Verde, Belgium, Sri Lanka, Uzbekistan, Egypt, Mauritius, Burkina Faso, Slovenia, Albania, Poland, Oman, Angola, Singapore, Belarus, Togo, Ghana, Kenya, United States, Paraguay, Malaysia, Bolivia, Zimbabwe, Antigua and Barbuda, El Salvador, Suriname, Burundi, Morocco, South Sudan, Madagascar, Greece, Sweden, Austria, Syria, Argentina, Samoa, Estonia, Ukraine, Benin, Costa Rica, Latvia, Kazakhstan. A well-developed logistics chains and a partnership network guide us to deliver our products anywhere in the planet promptly without undermining product quality.
A specific source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the direction of manufacturing equipment.
All spare parts from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this quantity is ascending every day. We are glad that buyers choose FAMAGA again and again, and we are glad to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To get some advice or book, get in touch with us or send a message to the online chat on our site. You can also forward a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |