We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822064105
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Stroke | 160 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822064105, catch up with FAMAGA, the world's main company of manufacturing equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of outcomes and individual attention to each orderer. We praise everyone, who conspired with us - thus, our regular buyers receive the most attractive purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such buyers, and we constantly arrange new agreements. More than 600 proceedings are resolved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Switzerland, Yemen, Suriname, Albania, Grenada, Papua New Guinea, Belize, Poland, Dominican Republic, France, Comoros, Singapore, Benin, Afghanistan, Japan, Croatia, Monaco, Seychelles, Luxembourg, Thailand, Armenia, Belarus, Bulgaria, Vietnam, Estonia, The Bahamas, Tonga, Philippines, Mauritius, Malta, East Timor, Georgia, Kuwait, Brazil, Costa Rica, Senegal, Zimbabwe, Chile, Ireland, Finland, Nigeria, Mauritania, Antigua and Barbuda, Swaziland, Turkey. A well-developed logistics connection and a partnership network assist us to conduct our units anywhere in the globe as soon as possible without compromising product quality.
A special source of repute for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the range of industrial equipment.
All products from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is rising every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as stay in control.
To ask a question or order, phone us or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |