We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822010636
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M5 |
Stroke | 40 mm |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822010636, connect FAMAGA, the world's primary supplier of factory-made equipment. Our company has functioned for more than ten years - these are ages of experience, which are described in the quality of merchandises and special attention to each client. We cherish everyone, who joined with us - therefore, our regular buyers receive the most attractive purchase forms and discounts on the manufacturing equipment market. Today, there are more than 4000 such buyers, and we constantly compose new agreements. More than 600 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Greece, Iraq, Colombia, Cambodia, Israel, Burma, Angola, Uzbekistan, Vietnam, Iran, Chad, Monaco, Uruguay, Paraguay, Uganda, Cameroon, Armenia, New Zealand, Slovakia, Tajikistan, Guatemala, Senegal, Costa Rica, Lithuania, Niger, North Korea, Luxembourg, India, Cape Verde, Burundi, Macedonia, Bosnia and Herzegovina, Jamaica, Latvia, Malta, Haiti, Andorra, Brunei, Kazakhstan, Rwanda, Egypt, Bulgaria, Togo, Sierra Leone, Zimbabwe. A well-developed logistics bond and a partnership network let us to send our units anywhere in the earth on-time without compromising product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of factory-made equipment.
All products from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that clients choose FAMAGA again and again, and we are pleased to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To ask a question or place an order, phone us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Other versions can be ordered from AVENTICS sales offices. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Piston | Nitrile rubber |
Front cover | Brass Aluminum |
End cover | Aluminum |
Scraper | Polyurethane |